Products
   Miniature Compressor
   KTN Compressor
   HIGHLY Compressor
   GMCC Compressor
   PANASONIC Compressor
   MITSUBISHI Compressor
   SANYO Compressor
   HITACHI Compressor
   COPELAND Compressor
   DAIKIN Compressor
   DANFOSS Compressor
   LG Compressor
   SAMSUNG Compressor
   Controller Board
   Refrigerant & Refrigerant Oil
   Copper Tube & Copper Fitting
   Parts for P&T Control
   Valves
   Filter Driers
   Capacitors
   Motors
   Tools
   Installation & Service Material
   AC Contactor & Relay
   Seperator & Receiver

Catalog Download

Hot Prodcuts
VH2012A BLDC 12V miniature compressor
VH2012A BLDC 12V
KTN-R22 SERIES 208-230V/60Hz/1PH
KTN-R22 SERIES 20
VH2024A BLDC 24V miniature compressor
VH2024A BLDC 24V

Vibration Absorber


Vibration absorber


PubDate:2012-8-6 1:44:57     Hits:568

Product: Vibration absorber 

General Description:

  • Vibration Absorber model SVA series are designed to install in the suction and discharge lines of air conditioning and other refrigeration systems to reduce vibration in the transmission of compressor-induced vibration through system piping.
  • Vibration Absorber are produced by deep pitch corrugated rubbing for increasing flexibility and vibration absorption,covered by high tensile wire braid for superior strength.
  • The tubing and braid are reinforced by ferrules at each end, and connected to a female copper tube end by high temperature of brazed alloys.
  • Each Vibration Absorber is tested for pressure and then carefully vacuum tested by using a highly sensitive helium mass spectrometer leak detection device.

Feature:

  • OEM is available
  • Size are available in both in metric and inch units
  • The ferrule and tube end part are made from copper
  • Hose and copper rube are brazed welded
  • All parts have been cleaned and dehydrated for refrigeration service
  • Each pressure and vacuum unit has been tested, cleaned ,dehydrated and sealed in plastic film
  • A completed physical and chemical analysis of all basic components
  • Components have been checked and inspected during various phases fo assembly
  • Precise end sized
  • Perfect inspectionv

 

MODELNO

FLEXIBLE TUBING

WIRE BRAID

FERRULE

TUBE END

SVA-1thru 13

STAINLESS STEEL 304

STAINLESS STEEL 304

COPPER

COPPER

 

Specification:

 

Model No.

Normal Size  (in)

Weight(g)

Dimension(in)

Max Working Pressure(psig)

Burst Pressure(psig)

A(I.D)

B(±1/8)

C(±1/8)

D(±1/4)

E(±1/16)

SVA-1

3/8

130

3/8

13/16

6-15/16

8-9/16

1/2

500

2500

SVA-2

1/2

135

1/2

7/8

7-1/4

9

1/2

500

2500

SVA-3

5/8

200

5/8

15/16

8

9-7/8

11/16

500

2500

SVA-4

3/4

220

3/4

1-1/4

8-1/16

10-9/16

11/16

500

2500

SVA-5

7/8

260

7/8

1-7/16

9-1/8

12

13/16

500

2500

SVA-6

1-1/8

400

1-1/8

1-13/16

9-7/16

13-1/16

13/16

500

2500

SVA-7

1-3/8

550

1-3/8

2

11-1/2

15-9/16

7/8

500

2500

SVA-8

1-5/8

920

1-5/8

2-1/4

12-3/8

16-7/8

15/16

500

2500

SVA-9

2-1/8

1335

2-1/8

2-3/4

15-3/16

20-5/8

15/16

390

1950

SVA-10

2-5/8

1730

2-5/8

3-1/8

18-1/16

24-5/16

1-1/4

340

1700

SVA-11

3-1/8

3830

3-1/8

3-7/16

20

26-15/16

1-1/2

300

1500

SVA-12

3-5/8

3830

3-5/8

4-1/8

24

32-3/16

1-9/16

175

525

SVA-13

4-1/8

4431

4-1/8

4-7/16

24

32-15/16

1-9/16

175

525



NAME
E-MAIL *
MESSAGE *
VALIDATION *




Copyright © Vestar International Industry CO.,LTD. 
Tel: +86-532-80999612   Fax: +86-532-80999246    P.C.: 266100
Email:  sales2@cnvestar.com ;    sales22@cnvestar.com
Address: Room 1-604, Art and Technology Space, No.63 Haier Road, Qingdao, China
Web Site: www.cn-vestar.com ;   http://cnvestar.en.alibaba.com